Improve your car’s power, torque, and throttle response with a premium engine performance booster. Plug-and-play upgrade for smoother, faster acceleration.
Engine Performance Booster
Engine Performance Booster
Engine Performance Booster
Engine Performance Booster
Engine Performance Booster
Engine Performance Booster
Engine Performance Booster
MAXOTO BOOSTRPRO
MAXOTO BoostrPro
BoostrPro is the best choice for performance enhancement with chip tuning boxes. BoostrPro is an additional control unit that sits between the engine sensors and the engine control unit (ECU). By optimizing boost pressure and injection, chip tuning with BoostrPro can increase efficiency by up to 25% while reducing fuel consumption by up to 1 l/100 km. More power + less power consumption + easy installation and management.
Easy to install, instant fun. Installation of the BoostrPro chip tuning box is accomplished in a few simple steps. A step-by-step illustrated manual is included with the BoostrPro chip tuning and removing it and reverting to the original settings of the vehicle is quick and easy, such as when replacing a new vehicle. The BoostrPro tuning is available for use on a wide range of common petrol and diesel cars.
BoostrPro plugin
Easy to install
Just plug it in and instantly tune it for more power
It only takes less than 30 minutes
FAQs
The LED does not light up.
Is the battery of the Remote charged? Fully charge the Remote. Checked all connected components? Is the MAXOTO PedalBox Pro switched on? Turn on ignition or start the car, problem solved? None of the above. Contact our customer support.
The car doesn`t run smoothly.
Check all connected components.
Are the connectors in the right position?
Are the LED`s lit? Have you changed the program?
The EML light is shown or the vehicle goes into LIMP mode.
Reduce the settings using the minus button.
Try an alternate program.
Contact costumer support.
Engine light shows up.
Reduce the program by pressing the minus button.
There is no noticeable increase in performance.
Increase the setting using the plus button.
Try a different program.
How do I return to default throttle setting?
The STOCK mode sets the vehicle to default setting.
Turn off the ignition when removing the MAXOTO PedalBox Pro. Wait until all
electrical consumers are switched off. Remove the MAXOTO PedalBox Pro
and reconnect the accelerator with the original plug.
The LED does not light up.
Press the minus button for 10 seconds until performance levels flash blue.
Release the minus button, the blue flashing indicator bars will scroll back
and forth.
Press the minus button again for 10 seconds.
The reset is confirmed by the blue flashing performance levels.
How do I reset the entire system, for example, to delete pairing lists?
The Remote is connected to the Base.
Press the minus button for 10 seconds.
The reset is confirmed by the blue flashing performance levels.
Alternatively, you can also delete the pairing lists in the
MAXOTO PedalBox Pro app settings.
