Upgrade heavy-duty vehicles with a Heavy-duty engine tuning box. Boost torque, enhance performance, improve fuel efficiency, and enjoy smoother driving.
Heavy-duty engine tuning box
Heavy-duty engine tuning box
Heavy-duty engine tuning box
Heavy-duty engine tuning box
Heavy-duty engine tuning box
Heavy-duty engine tuning box
Heavy-duty engine tuning box
Heavy-duty engine tuning box
MAXOTO POWER CONTROL DX | HEAVY MOBILITY
MAXOTO POWER CONTROL DX | HEAVY MOBILITY
With the innovative optional control unit, Power Control-DX, the factory settings for fuel injection are optimized. In addition to the classic optimization using engine management sensors, DTE has developed injector tuning with Power Control-DX for special applications. The injection cycle is adjusted precisely and in real time via direct control at the injector. In this way, Power Control-DX can reduce fuel consumption by up to 15%, depending on the vehicle, driving performance and operating conditions.
To guarantee this precise operation, the Power Control-DX follows precise testing procedures, under various load situations and at different temperature ranges as well as altitudes. The auxiliary control unit is perfectly tuned on a performance test bench.
DTE injector adjustment with Power Control Dx | Heavy Mobility
Optimization of injection cycle
More torque for heavy duty work
Less fuel consumption, higher efficiency
Adaptable to vehicle and transport modes
The car reaches its destination faster
Fewer gear changes result in less traction
How does Power Control-DX work?
To increase efficiency, the Power Control-DX is directly connected to the injectors. Fuel is injected into each cylinder through the injectors. After the main direct injection pulse, the DTE uses an additional control unit to apply additional injection sequences.
Power Control works extremely precisely. An additional control unit measures changes in the operating speed of each cylinder via a system of sensors. Using the recorded data and the vehicle-specific MAP, Power Control-DX adjusts injection in real time. This helps to optimise power and torque and reduce the time spent driving at high loads. Power Control-DX significantly improves fuel economy, reduces CO2 emissions and helps to save fuel.
FAQs
The LED does not light up.
Is the battery of the Remote charged? Fully charge the Remote. Checked all connected components? Is the MAXOTO PedalBox Pro switched on? Turn on ignition or start the car, problem solved? None of the above. Contact our customer support.
The car doesn`t run smoothly.
Check all connected components.
Are the connectors in the right position?
Are the LED`s lit? Have you changed the program?
The EML light is shown or the vehicle goes into LIMP mode.
Reduce the settings using the minus button.
Try an alternate program.
Contact costumer support.
Engine light shows up.
Reduce the program by pressing the minus button.
There is no noticeable increase in performance.
Increase the setting using the plus button.
Try a different program.
How do I return to default throttle setting?
The STOCK mode sets the vehicle to default setting.
Turn off the ignition when removing the MAXOTO PedalBox Pro. Wait until all
electrical consumers are switched off. Remove the MAXOTO PedalBox Pro
and reconnect the accelerator with the original plug.
The LED does not light up.
Press the minus button for 10 seconds until performance levels flash blue.
Release the minus button, the blue flashing indicator bars will scroll back
and forth.
Press the minus button again for 10 seconds.
The reset is confirmed by the blue flashing performance levels.
How do I reset the entire system, for example, to delete pairing lists?
The Remote is connected to the Base.
Press the minus button for 10 seconds.
The reset is confirmed by the blue flashing performance levels.
Alternatively, you can also delete the pairing lists in the
MAXOTO PedalBox Pro app settings.
